Alarm System Overview
- Wirelessly communicates to security sensors up to 300 feet away
- Automatically calls four telephone numbers and plays a user recorded message if alarm is activated
- Arm or disarm using a keychain remote or wireless keypad
- Connects to the PowerLink (sold separately) for remote access and control of the system
Essential Info
SecureLinc Family Security System is a full-featured, customizable
security alarm system that connects in a fraction of the time of
hardwired systems and includes everything you'll need to get your
home security started. Just plug the main unit in to power and a
phone jack, mount the wireless sensors in the zones you want to
protect, and you're ready to program the system.
The SecureLinc Family Security System supports 28 wireless zones and two hardwired zones with the ability to record up to 100 events in its internal log. The kit includes two four-button wireless keyfobs, three wireless magnetic window/door contacts, and two 85-Pound Pet Immune Wireless Motion Detectors. Additional contacts, detectors and keyfobs may be purchased separately to expand your system based on your installation needs.
Keep your family even safer by adding live monitoring to your security or alarm system.
The SecureLinc Family Security System supports 28 wireless zones and two hardwired zones with the ability to record up to 100 events in its internal log. The kit includes two four-button wireless keyfobs, three wireless magnetic window/door contacts, and two 85-Pound Pet Immune Wireless Motion Detectors. Additional contacts, detectors and keyfobs may be purchased separately to expand your system based on your installation needs.
Keep your family even safer by adding live monitoring to your security or alarm system.
What's Included
More Info
Easy to Program and Control Securely
Programming the SecureLinc panel
is easy, using the large, backlit buttons and the LCD screen. You can
also mount a Wireless 2-Way Keypad by any entry to your home where it
will communicate your commands acting as a remote panel controller. The
wireless keypad receives status reports from the SecureLinc panel, so
you'll know at a glance what the status of the system is as well as if
any events occurred while you were out. Transmit signals to your
Securelinc Family Security System using a keyfob transmitter. A keyfob
transmitter allows you to arm your panel in home or away mode, disarm
your panel or transmit an X10 lighting command. Upon pressing any of the
four recessed buttons, the keyfob transmits a CodeSecure™ digital
sequence along with a 4-bit function code associated with the button
that was pressed. Different digital sequences are transmitted each time,
so that malicious code grabbing is almost impossible.
Includes Pet Immune Motion Sensors
Pet immune motion sensors are included in this kit which mean that the system will not be triggered falsely when your cat or dog walks across the protected room. Due to their smaller profile, pets can be ignored by the pet immune motion sensors preventing a false alarm. With a coverage area of 30 by 30 feet, these fully supervised detectors will keep an eye on your home when you're not around.Built in Siren and Phone Dialer
When it detects an alarm signal from one of the wireless sensors, the alarm system blasts an 85dB siren that not only alerts your family, but also sends would-be thieves fleeing. In addition, you can program it to call any private phone number (i.e.: a friend or neighbor, your office, your wireless phone, etc.) and play a pre-recorded message in your own voice if connected to your standard telephone or to a cellular network (via the GSM Modem for Web-Enabled Security Kits). It doesn't even need its own dedicated phone line! It also supports 24-hour monitoring by commercial alarm monitoring personnel, who can dispatch police, fire or medical response (depending on the type of alert it receives). It can even call you for non-alarm events. For example, want to know that your kids arrived home safely from school? The security system can call you at the office to let you know that your child successfully disarmed the alarm.Individual User Codes and Message Center
The Web-Enabled SecureLinc Family Kit supports up to 8 individual user codes, so each member of your household can have an independent code ID. It also doubles as a message center, so you can hear and leave messages up to 20 seconds for other family members. User names for codes 5-8 can be recorded and will be played during a Latchkey report.Internet Connectivity Via an Optional Powerlink
Connect your SecureLinc to the PowerLink (sold separately) for remote control of your security system from any Internet-connected computer in the world. The PowerLink also allows remote or on-site visual surveillance, connecting to up to four wired or wireless cameras (each sold separately). The PowerLink can also be purchased with a single wired or wireless camera as a kit.Lighting Control via X10
For maximum convenience, SecureLinc can even operate 15 X10-controlled lights or appliances (or 15 groups of lights or appliances), including 2-way appliances and those with dim/bright features. In addition to scheduling your X10 appliances to prepare your home for your arrival at night or from a vacation, you can also use the X10 timer function to make your home look occupied when you're away. Or you can have it turn the X10-controlled porch light on for four minutes when you arm or disarm the system, so that you'll never have to enter or leave your house in the dark. Note: To access these features, you'll need the optional X10 Cable & Interface, sold separately.NOTE: It's important to note that while "Voice Over IP" can work with a home alarm system, we do not recommend it. If for any reason you lose your Internet connectivity - due to a power outage or problem with your Internet service provider, for example - "Voice Over IP" will not work, and your alarm system will not be able to make an emergency call if it's triggered. For this reason we recommend you keep a basic traditional landline dedicated to your home alarm system and use "Voice Over IP" for the rest of your calling needs.
Specifications
|
Specifications |
|
| Manufacturer: | SecureLinc |
| Manufacturer Product No.: | Plus #7 |
| Dimensions: | 10 13/16" x 8" x 2 1/8" (275mm x 203mm x 55mm) |
| Weight: | 990g (2.2 pounds) without batteries |
| Zones: | 28 wireless, 2 hardwired |
| Hardwired Zone Requirements: | 2.2 k. E.O.L. resistance (max. resistance of wires 220) |
| Zone Types: | Interior follower, perimeter, perimeter follower, delay 1, delay 2, 24h silent, 24h audible, fire, non-alarm, emergency, gas and flood |
| User Codes: | 8 codes, 4 digits each |
| Control Facilities: | Integral keypad, PowerCode hand-held transmitters, wireless commander, MCM-140+, remote telephone, local or remote computer |
| Display: | Single line, back lighted 16-character LCD and 4 LED indicators |
| Arming Modes: | AWAY, HOME, AWAY-INSTANT, HOMEINSTANT, LATCHKEY, FORCED, BYPASS |
| Alarm Types: | Silent alarm, siren alarm or sounder (internal) alarm, in accordance with zone attributes |
| Siren Signals: | Continuous (intrusion / 24 hours / panic); triple pulse - pause - triple pulse (fire) |
| Siren Timeout: | Programmable (4 min. by default) |
| Internal Sounder Output: | At least 85 dBA at 10 ft. (3m) |
| Supervision: | Programmable time frame for inactivity alert |
| Data Retrieval: | Status, alarm memory, trouble, event log |
| Operating Frequencies: | 315 MHz (in USA & Canada) or other UHF channels per local requirement in the country of use |
| Receiver Type: | Super-heterodyne, fixed frequency |
| Receiver Range: | 600 ft. (180m) in open space |
| Antenna Type: | Spatial diversity |
| Coding: | PowerCode and/or CodeSecure™ |
| Power Supply: | Plug-in transformer 120 VAC, 60 Hz / 9 VAC, 1A (in the U.S.A.); 230 VAC, 50 Hz / 9 VAC, 1A |
| Current Drain: | Approx. 65 mA standby, 800 mA at full load and in alarm |
| Site External Siren Current (EXT): | 450 mA max @ 10.5 VDC when powered by AC & DC (battery) |
| Site Internal Siren Current (INT): | 450 mA max. @ 10.5 VDC when powered by AC & DC (battery) |
| PGM Output Current: | 100 mA max. |
| Detector 1 & 2 Total (Sum) Current: | 100 mA max. |
| High Current / Short Circuit Protection: | All outputs are protected (current limited) |
| Battery Test: | Once every 10 seconds |
| Built-in Modem: | 300 baud, Bell 103 protocol |
| Data Transfer to Local Computer: | Via RS232 serial port |
| Report Destinations: | 2 central stations, 4 private telephones, 1 pager |
| Reporting Format Options: | SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID, Scancom |
| Pulse Rate: | 10, 20, 33 and 40 pps - programmable |
| Message to Private Phones: | Tone or voice |
| Message to Pager: | PIN No. Alarm Type, Zone No. |
| Operating Temperature Range: | 32°F to 120°F (0°C to 49°C) |
| Storage Temperature Range: | -4°F to 140°F (-20°C to 60°C) |
| Humidity: | 85% relative humidity, @ 30°C (86°F) |
| Approvals: | FCC compliant |
| Warranty: | 1 year, limited |
|
Magnetic Contact Transmitters |
|
| Dimensions: | 3 3/16" x 7/8" x 15/16" (81mm x 22mm x 23.5mm) |
| Weight: | 1.2 oz. (34g), excluding battery |
| Battery Weight: | 0.45 oz. (13g) |
| Frequency: | 315, 433.92, 868.95 |
| Transmitter's ID Code: | 24-bit digital word, over 16 million combinations, pulse width modulation |
| Overall Message Length: | 36 bits |
| Alarm Inputs: | 2: one internal, one external, each with a separate 24-bit transmitter |
| Auxiliary Input Circuit Type: | N.C. / E.O.L., selected with DIP switch |
| E.O.L. Resister Required: | 47 kilo ohms |
| Message Repetition: | Once every 3 minutes or one-shot, selectable via on-board DIP switch |
| Supervision: | Signaling at 60-minute intervals via reed switch or aux. input, including battery supervision |
| Tamper Reporting: | Every 3 minutes until restored |
| Power Source: | 3V Lithium CR-2-type battery, Panasonic or Sanyo only |
| Battery Life Expectancy: | 3 years (typical use) |
| Operating Temperature: | 32° F to 120° F (0° C to 49° C) |
| Standards: | FCC compliant |
|
Wireless PIR Detectors |
|
| Dimensions: | 4.1" x 2.4" x 1.3" (104mm x 60mm x 32mm) |
| Weight: | 2.5 oz. (71g) |
| Maximum Coverage Range: | 30' x 30' (9m x 9m), 90° |
| Pet Immunity: | Up to 85 lbs. (18kg) |
| Vertical Adjustment: | 3-position adjustment scale: 6 ft., 7 ft., and 8 ft. (1.8m, 2.1m, and 2.4m) |
| Battery Type: | 3.6 Volt lithium thionyl chloride (LiSOCl2) battery, size 1/2AA, Tadiran TL-2150 |
| Nominal Battery Capacity: | 1 Ah |
| Standby Current: | 0.015mA |
| Transmit Current: | 12 mA (including LED) |
| Battery Life Expectancy: | 3 years (typical use) |
| Detector: | Dual-element low-noise pyroelectric sensor |
| Pulse Counter: | Programmable to 1,3 or 5 pulses |
| Rearm Timer: | 2 minutes after last alarm |
| Frequencies: | 315, 433.92, 868.95, 869.2625 MHz |
| Transmission Sequence: | 3 data bursts at variable intervals within 3 seconds |
| ID: | 24-bit factory-selected code, >16 million possible combinations |
| Total Message Length: | 36 bits |
| Operating Temperature: | 14° F to 120° F (-10° C to 49° C) |
| Storage Temperature: | -4° F to 140° F (-20° C to 60° C) |
| FRI Protection: | >20 V/m up to 1000 MHz |
| Standards: | FCC and Directive 1999/5/EC compliant |
|
Miniature Keyfob Transmitters |
|
| Dimensions: | 2 1/8" x 1 1/4" x 1/2" (53.5mm x 31.5mm x 12.5mm) |
| Weight: | 3/4 oz./21g (including battery) |
| Frequency: | 315, 433.92, 868.95 MHz |
| Modulation: | ASK (ON-OFF keying) |
| Coding: | 28-bit ID, 4-bit function code and 32-bit rolling code |
| Transmission Duration: | Up to 2 seconds |
| Power Supply: | 12V alkaline battery, type GP 23A or equivalent |
| Current Consumption: | 11 mA (during transmission) |
| Battery Life Expectancy: | 1 year (typical use) |
| Operating Temperature: | 32° F to 120° F (0° C to 49° C) |
| Standards: | FCC compliant |
